Headlight For 2013-2015 Toyota RAV4 Clear Lens Left & Right 2pcs Chrome

Items Description：

Item Type: Headlight

Condition:  New

Warranty: 1 Year 

OE Number：811100R042/ 811500R042/ TO2503217/ TO2502217

Quantity Sold: 2 pcs/set

Fitment：

for Toyota 2013-2015 RAV4

Features & Benefits:

-Designed as a DOT/SAE-compliant direct replacement for your original headlights.
-Plug-and-play wiring.
-Choose from assemblies with or without bulbs.
-Superior, Lasting Visibility
-State-of-the-art design guarantees performance that delivers excellent visibility.
-UV-coated to slow yellowing.
-Ultimate Quality & Safety Assurance
-Our quality control process ensures that all products meet strict standards for fitment and durability.
-Stands up to rigorous cycling tests and diligently tested in real-world conditions.
-Adaptive and LED headlights available when OE equipped, as well as xenon and halogen.

Notes:

For US Built Models; Location : Left and Right

Brand New in the Box – Fit and Quality Guaranteed!

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

1.Find the adjustment screws：Firstly, locate the adjustment screws on your vehicle.

2. Adjust the headlights individually：The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field：The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field：The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.

5.Test your results：If there is a problem after installation, please check whether the connection is correct. If you have any other questions, please feel free to contact us!