Right Headlight Fit For 2016-2019 Chevrolet Cruze Chrome Housing Halogen Type

Product Features:

Chrome Housing Clear Lens With Amber Corner
Our Polycarbonate Lens offer Superior UV protection and a High Impact Resistance
These Headlight lamps are covered by 10 months Warrenty.
Please Reuse Stock Low Beam H7/ High Beam H1 Bulbs
If You Receive Lighting Product That Comes With The bulbs, The Bulbs Are Not Covered Under Our Warranty. Our Warranty Applies Only To The Light Assembly.
Fit for:

For 2016-2019 Chevrolet Cruze L LS LT （1.4L 1.6L）
Vehicle Compatibility Reference Number: GM2503428,GM2502428
Please Note: Please search for your vehicle in the compatibility table and make sure this part is compatible with your vehicle matching in year, make and model.
Packing List :
1 PC of Headlight(Passenger Right Side，bulbs not included)

Installation：

Trouble-free Installation :These bolt-on style assembly are designed for quick and easy installation.

No Installation Guide or Instruction Included, Professional Installation is Highly Recommended.



Note:

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.



1.Find the adjustment screws：Firstly, locate the adjustment screws on your vehicle.



2. Adjust the headlights individually：The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.



3. Adjust the vertical field：The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.



4. Adjust the horizontal field：The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.



5.Test your results：If there is a problem after installation, please check whether the connection is correct. If you have any other questions, please feel free to contact us!